For a larger area you may wish to consider a stand or pedestal fan as an alternative to the desktop fan. The variable stands on these kinds of products will allow you to get the fan head up higher so that the air can be directed over a larger area. With a pedestal fan, with a relatively decent sized head such as 18″, you can obtain good coverage in a big room or office area. Even so, for smaller sized areas the oscillating tower fan will likely be all right.

One point to make about the tower fan compared to the stand fan is the fact that they consume less space plus they also are inclined to appear very attractive. So if you have a smaller area in your residence or office, an attractive looking tower fan is both sensible and it looks great too. In fact, there is an even more compact model known as the mini tower fan which often can easily be placed on a table or desk.

So, after you have determined which oscillating fan is ideal for the room you need cooling in, you should consider if any of the more advanced features are really necessary. For example, the more pricey models in the Hunter oscillating fan range have features such as a remote control. This function is self explanatory, but of course it contributes to the price of the fan. Another enhanced function is the breeze function. On particular oscillating fan models, the breeze setting will attempt to create a natural breeze by changing the fan between its many different speed settings in a cycle. This is a great feature, but again you might not need to pay extra for this feature if it is not vital to you.

The more pricey products also tend to look more sophisticated. They may be made with a chrome or silver finish instead of a cheaper plastic model. For those who just need some basic cooling at the office or in a small workshop, you might not be concerned with how the oscillating fan looks.

If you require something for your living room or bedroom, then perhaps you’d be more satisfied getting a really nice looking oscillating fan with a few advanced features. The timer function is quite useful for the bedroom as it will permit the fan to turn off when you are sleeping and automatically start again in the morning. Most enhanced models include this, but this function will be more sophisticated on the higher end oscillating fans.

Besides the oscillating fan features you are looking for, the room size is also the key thing to consider when purchasing one. A top of the line oscillating fan can cost you at least double the price of a basic fan, so it is worth taking some time to think of your air flow needs before you make your decision. Naturally, all these oscillating fans will provide you with the basics which include oscillation and speed controls. If this is all you need to have, it is not necessary to fork out more to have an oscillating fan with more advanced features which you will never use.

Jeff works in the heating and air conditioning industry and frequently talks with clients just how an oscillating fan might enhance comfort and reduce utility bills. In today’s economic conditions, a large number of customers are finding that an oscillating fan can provide ample comfort which lessens the necessity to operate the air conditioning as frequently.

Some Things to Consider When Adding Lights

Darkness can quickly transform a functional space into a wasted corner of the room. In order to maximize a home’s precious space, it is important that the space be well-lit. When your items are tucked away in inaccessible areas, they might as well end up in the trash. An obstructed view of a cabinet is hazardous to you and your family. Breakable items that are stored away can be easily broken when you are unable to see them clearly. It is unfortunate if the broken item is destroyed, it is tragic if a loved one is hurt in the process.

Spaces in the bathroom, kitchen, and garage are perfect locations that cry for extra lighting. When your items are placed in a well-lit space, it is much easier to keep the area clean and manageable. It also saves money in the end, because you will never buy extra items that you already owed, but were hidden out of sight.

Lighting Makes Your Collectibles Shine

We know that lighting has practical uses, but is can also provide an added attraction to your collectibles. Place small space lights in books shelves for visual interest. You can also try this decorator’s technique in putting the lights on the bottom shelf facing upward. Under lighting adds drama for an interesting visual effect.

Don’t just stop at book shelves. Any storage unit throughout the home is fair game for lights. An old curio, handed down for generations can get a modern lift with some small lights. They will brighten the piece and draw attention to any collectibles stored inside. Also consider placing lights under small hallway shelves. They can double as wall lighting if strategically placed.

Easy Installation

Small area lights can be very easy to install. Many are single units that operate under battery power. The only installation required is a small pad of double-stick foam tape or a couple of screws. However, there are some more sophisticated versions that require a certified electrician to install them safely.

Installing under cabinet lighting is both practical and aesthetically pleasing. A brightly lit space makes it easy to find items that have been stowed away and long forgotten. Out of sight, out of mind, is an old saying with a modern lesson. Today, few of us can afford to waste precious money on things we don’t need. When you can easily see the items that are stored away, they are accessible when needed.

Find those fantastic prices on LED Bulbs by looking online. There you can find several bulbs to use for Under Cabinet Lighting at home. Head online now and learn more.

Irrespective of whom your tenants are, regardless of whether you are leasing residential apartments, an industrial building, commercial, or any other sort of building, your tenants are sure to need hot water. It’s likely that your water heating system is one of your larger expenses. If you want to cut your expenses this would be a very good place to begin. Installing solar heating tubes will help you reduce heating costs by heating some of your building’s water for free using just energy from the sun. Unlike solar panels, solar heating tubes will operate whatever the weather and will save you money throughout every season.

Solar heating tubes are basically cylinders that take in and store the suns energy. Their cylindrical shape makes them more efficient than standard solar panels. Some of the tubes’ surface is constantly in contact with the sun allowing them to absorb energy throughout the day, whereas solar panels need direct sunlight to work.

Heat from the sun is absorbed by the tubes and stored internally by an inner tube of fluid. The fluid super-heats to one hundred seventy degrees Fahrenheit and that heat energy is introduced to your heating system. What that means, to put it in the most basic way, is that the sun’s heat is used to heat your building’s water. Solar heating tubes also give you a second way to reduce heating costs; by using that heated water to heat your building itself.

The bottom line is that solar heating tubes will reduce heating costs. Any costs that you can reduce or eliminate will give you an edge in a tough market. As climate change experts call for more companies and individuals to switch from carbon based fossil fuels to renewable forms of energy, you should seriously consider investing in solar heating tubes as a way to reduce heating costs. Look into government programs that could defray some of the expense involved in installing solar heating rods and other carbon free energy sources.

Of all of the benefits of solar heating tubes, perhaps the best benefit to installing solar heating tubes to your buildings comes from the satisfaction your tenants have knowing you are doing what you can to bring down any costs for yourself and for them. Should you be advertising for new tenants you may also find that your cost cutting measures are helping you appeal to an ever increasing number of people that are concerned about the environment.

Craig Axelrod is a principal for Emmy Energy, a NY solar energy business delivering solar heating tubes solar power systems & green products in the Northeast.

The Benefits of Solar Heating Tubes

We all know about solar panels. The technology has been around since the sixties, and you’ll have seen them on roof tops. Whilst solar panels were a good idea, they did have a few fundamental design flaws, their flat surface for example, which needed direct sunlight to function properly. The design of solar panels also means that much of the stored energy is lost before it can be used. Solar heating tubes correct these design deficiencies by using a cylindrical shape, allowing them to be positioned so they receive solar energy throughout the day, thus gathering in more of the sun’s energy. The energy is also stored in a more efficient manner, using a vacuum to insulate the tube and prevent it from losing its stored heat.

Solar heating tubes are ideal for providing hot water for your building, while cutting your energy bills significantly. You may be able to save even more money by using your solar heating tubes to heat the entire building. The more solar power you can use, the less you’ll need to rely on other, more pricey forms of power. If you are a landlord energy costs will be one of the primary factors potential tenants will consider. Having lower energy costs will not only appeal to tenants on a budget but also to those with environmental concerns.

Green Energy Gives You an Edge in the Competitive Rental Market

Today’s rental market is extremely competitive. It always has been, and will continue to become more and more competitive in the foreseeable future. Those who want to succeed have to do everything they can to give themselves an edge over the competition, and when a landlord cuts his bills with solar heating tubes, he gives himself several advantages over those relying solely on fossil fuels and electricity.

With the USA and other governments around the world firmly behind green energy initiatives, the costs of installing solar heating tubes can now be subsidized. Solar heating tubes are a cutting edge green technology. Whether your building houses apartments, industry, or virtually anything else, solar heating tubes will save any landlord energy expenses.

Craig Axelrod is VP of Business Development for EmmyEnergy.com, a New York solar power company installing solar heating tube systems solar energy systems & clean energy systems in the North East.

Wind power has been getting a lot of press of late and is becoming the green technology of choice in many countries, but you may not have heard about solar heating tubes: the alternative green energy source. There is no better, or more untapped, source of renewable energy than the sun. Every day, 365 days per year The sun gives us energy in the form of light and heat throughout the year. But most of the energy it supplies goes unused, while we continue to burn our way through the planets limited supply of fossil fuels. Things will only get worse if we continue to use fossil fuels, and it’s time to put all the newly developed green technology to use, while the government is offering financial incentives.

Using solar heating tubes as an alternate form of green energy provides several advantages, for both landlords and tenants. Depending on the amount of hot water is used in the building, the savings can be considerable, even if solar energy is used only to heat the building’s water. Naturally, different types of building will use vastly different amounts of hot water, but very few buildings use no hot water at all, whether it is for tenants taking showers, doing their laundry, washing dishes, or using warm water for general cleaning purposes. Lots of properties also employ radiant heat, which use coils of hot water underneath the floor boards to heat the entire building. If your buildings are heated in this way, you will be able to take even greater advantage of the energy cost savings by cutting deep into your oil, gas, and electrical use for heating your buildings.

In places like New York solar energy has always been regarded as ineffective as the weather is changeable and there is often not enough direct sunlight for solar panels to be effective. Solar heating tubes, on the other hand, work differently and are able to capture much more sunlight. The solar heating tubes can be positioned in such a way that they can collect solar energy throughout the day, as they have a larger surface area than conventional solar panels, which only receive optimal solar power when the sun is shining directly onto their flat surface. Coupled with the fact that the energy is then kept in copper rods and surrounded by a vacuum sealed tube, providing perfect insulation and allowing very little of the energy to escape. In fact the tubes are so well insulated that the outsides of the tubes will remain relatively cool even though the temperature of the rods storing the solar power can be over 300 degrees Fahrenheit. The introduction of these two factors allows landlords to make use of solar power in climates where it was once though to be impractical, like those where there is frequent cloud cover and colder environments. If you are a landlord in New York solar energy is now within your grasp.

This is one green energy source that you would be a fool not to take advantage of. Installing solar heating tubes will not only reduce your carbon footprint and protect the o-zone, it also saves you a lot of money in the long run. If you put those two things together, it’s very difficult to ignore the benefits of installing solar heating tubes.

Craig Axelrod is a principal for Emmy Energy, a LI solar power business delivering solar heating tube systems solar electric systems & clean energy products throughout the North East.

When it comes to charging electronic equipment such as mobile phones, flashlights and MP3 players for example, nothing beats the Nomad 27M solar panel. When in use, the unit measures 22.5″ x 44.5″ x 0.03″, and when folded away for storage, it measures just 10.5″ x 7″ x2″. This makes it an ideal traveling companion, given that it can easily be store away inside your backpack, and because it only weighs 3.4 lbs, you’ll hardly even know you’re carrying it. Need to charge your phone while you’re hiking in the hills? Simply open up your Nomad 27M, attach it to the outside of your backpack, and then connect up your phone, flashlight, or any other appliance which needs charging. By the time you stop walking to take a break, your phone battery will be charged – it’s that easy.

Of course the biggest advantage of the Nomad 27M solar panel over the 13.5M panel is that the 27M produces a higher output, thereby making is more efficient. With that said, the 27M is also capable of storing energy for a greater length of time than the 13.5M version. Both models do however use the same 12V voltage for charging purposes, although the 27M utilizes an 18V open voltage circuit.

Included with the Nomad 27M solar panel are 3 Aluminum support rods which can be used to improve stability during outdoor charging. Additional, the kit also includes 4 robust grommets which allow you to position the panel at practically any angles, and if you’re concerned about having wires running everywhere, there’s no need to be because the connector cord is housed in a built-in pocket of its own. This of course helps to minimize the chances of someone tripping over the wire.

The Nomad 27M solar panel is made from top quality material which is durable and hardwearing. This essentially means that once you’ve bought it, you’ll have for many, many years. The unit is also water resistant, so even if you leave it standing outside overnight, you don’t need to worry about it getting damaged if it rains. Rain and dew will have absolutely no affect on it at all, but if you know you won’t be using it for a while, then it is of course better to fold it up so that it can be safely stored away in the case provided.

Jordan Eske has been living eco friendly since 2008. And in 2009 he decided to help consumers go green too with solar power. The Nomad 27M Solar Panel is rising in popularity for adventurers. Free reprint avaialable from: What Is A Nomad 27M Solar Panel Kit.

Green credentials aside, there are lots of reasons to install solar panels. You can cut your gas or electric bills significantly by becoming less reliant on your gas or electric boiler. You can use these savings to increase your profit margins, become more competitive by passing savings along to your tenants, or both.

Using solar power to heat water is not a new idea, of course. Experiments into the potential uses of solar power were conducted as early as the late nineteenth century. However, although steady strides have been made to improve the available technology, until recently solar power was less than effective in cold or cloudy locations. And yet this is where energy bills are at their highest. With the development of vacuum sealed solar heating tubes, however, more people are now able to switch to solar energy.

The cylindrical shape of solar heating tubes means that they can be positioned in such a way that part of their surface continually faces towards the sun, allowing the cylinders to absorb the sun’s rays for much longer than their predecessors, the flat solar panels. Because they are able to capture the sun’s energy more efficiently, they are offer a more reliable alternative to solar panels, heating water even when the day is overcast or cold. The fact that they are vacuum sealed increases their efficiency even further as vacuums provide the perfect conditions in which to insulate the heat source. Consequently less power is lost. The heating element on the inside of the tube will get hot, while the outside of the tube, insulated by the vacuum, continues to be cool to the touch. All of this leads to a lot more of the solar energy being retained and used for its intended purpose, heating the building’s water.

The power used by your boiler system represents a large portion of the electricity and/or gas your building uses. You can cut your energy bills and those of your tenants significantly by installing solar heating tubes and using green energy to your advantage. You only have to purchase and install your solar heating tubes once, but the savings can keep on coming.

This is the best time to begin using a green energy source such as solar panels. Many governments now offer financial incentives for building owners to install solar heating tubes that uses renewable, sustainable energy sources. Numerous governments allow tax rebates which cover most of the costs of installing these money and energy saving devices. Sooner or later, green energy is going to be the order of the day for all building owners. It’s more advantageous to act now, while the government will help defray some of the costs.

Craig Axelrod is VP of Business Development for EmmyEnergy.com, a NY solar energy company delivering solar heating tube systems solar energy systems & clean energy products in the North East.

Initial set-up expenses can be quite a bit higher than traditional air-source systems, but geothermal heat pumps present substantially decrease ownership costs over the long run.

Ground source heat pumps (GSHPs) are units that work with the earth’s heat to give heating, cooling and hot water for commercial businesses and residential buildings. The systems are developed to take advantage of the fact that temperatures are at a close to constant level of between 7 C and 21 C just a couple of feet beneath the ground, irrespective of geographic area or surface air temperatures. During winter, the units essentially extract heat from the ground and transfer it to a commercial building or home, although in summer the systems extract heat from inside buildings and transfer it to the ground. Ground source heat pumps are electrically run and are often referred to as geothermal heat pumps, or geo-exchange pumps, or merely as earth-coupled heat pumps.

A full-fledged GSHP machine comprises of a heat pump, a ground loop system for absorbing heat from the ground or rejecting it back to the ground, and air ducts or radiant floor systems for giving the hot or cold air. The ground loop system normally is made up of several loops of plastic tubing loaded with antifreeze liquid or water, hidden under the ground in horizontal or vertical way. In the course of winter, the liquid in the loops gathers heat from the ground and pushes it to the heat pump when a compressor elevates the temperature even more before circulating it throughout the building. The flow of the liquid inside the loops is reversed in the course of summer. This results in the warmer air being taken out from the building and transferred to the earth while cooler liquid is distributed back to the heat pump and then throughout the building. An open loop system operates in pretty much the same style, but in this instance the liquid in the loops is usually ejected into the ground.

Ground source heat pumps have been in use since the 1940s and are regarded as a more environmentally-friendly and cost-efficient alternative to conventional air-transfer based heating and cooling systems. Tests have demonstrated that GSHP systems have heating efficiencies up to 70% higher than regular systems and cooling efficiencies of nearly 40% above than air-conditioners. The preliminary cost of setting up a geothermal heat pump can be quite difficult compared to conventional heating and cooling systems. Even so, over the long-term the pumps are less costly to own and to preserve. They also can supply up to 50% savings on energy consumption. Sometimes, a geothermal heat pump is put in along with an air-source heat pump in order to cut down initial installation costs.

Learn more details about Ground Source Heat Pumps

Basically, storage heaters are made of compacted blocks, which cover heating elements. The elements and blocks are well insulated so as to reduce to the barest minimum heat loss that will escape through the side of the storage heater. Usually on top of this appliance there is a control used to regulate the amount of heat that is given out.

Okay so some features which you should put into consideration before buying it include: the size of the storage heater. Space constraint can actually make you get two small heaters instead of a big one. Also consider how long the support legs are and how this could affect the way it is installed.

Also do a comparison, for instance comparing the automatic heater with the manual storage heater. Although getting a manual heater will be cheap, but what about the cost of keeping this running. It is said that automatic type heaters can consume about say 15% less energy compared with the manual type heater.

Another feature to be considered before getting storage heaters is the outlet regulator. You should make sure that the storage heater you plan on getting has one since this makes for a better discharge of heat when included as part of this device.

In addition to the storage heater you can equally make use of another type of heater; a propane heater in your home albeit with some caution. This heater is made to be used in confined areas of your home. You can make use of it in your garage.

Storage and propane gas heater usually serve as a support to the primary or main source of heat in a home. The propane heater is a cheap and affordable source of heat energy that comes in models that are portable making it possible for them to be moved from one position in a room or enclosure to another.

Finally, before getting storage heaters the first step will be for you to find out if you can get adequate supply of off-peak electricity otherwise getting this heater will not be a financially wise decision.

More interesting stuff on Propane Heater and similar subjects is available at PropaneHeatersInfo.com. You will also be in the right place for all Storage Heaters queries and related matters. Click on a link now !

Hold up a second and let’s relax a bit Let’s explore that a touch. Listed here are 3 reasons why you should go green with wood pellets and stoves, for you to consider.

First off, in its favour, let me explain that Wood pellets are a low carbon or even carbon natural form of home heating. Sure, I recognize your objection that Wood pellet may appear like a heating option, which would require more work than an oil system for example. That which you say is true, I agree, but nonetheless Using wood pellets is very low maintenance, and only requires a few minutes attention a day.

Secondly, you really should consider that the price you are currently paying for oil for most people is unaffordable, and that are struggling to heat their homes and businesses. And, also, Oil and gas heating solutions are damaging the environment with carbon emissions, which are raising the global climate plus, better yet, with oil and gas we are dependant on foreign states such as Russia and the Middle East for energy, where wood pellets can be made locally.

Third and lastly, you’ll get Local benefits such as more jobs and increases local tax revenue from supporting local wood pellet production. And that’s going to signify Lower local unemployment at a time when many people cannot find a job. In addition, on top of that, in addition, you are supporting long-term jobs, as energy is a constant demand product.

Once you have had time to study the reasons, and give thought to them, you’ll find that a decent case can be made in favour of go green with wood pellets and stoves.

So just consider that for the moment. We just made quite a good case in favour. Imagine if you actually could go green with wood pellets and stoves?

Looking to find the best deal on Pellet Stove, then visit www.pelheat.com to find the best advice on Harman Pellet Stove for you.